Skip to content

1. Assembling The Machine Frame

Overview

Most of the assembly for the Pandaplacer CC1 has been completed and has undergone preliminary testing.

Users only need to install a few components to finish the assembly of the machine body.

Required Parts And Accessories

  • Aluminum Profile Support *4
  • Square Rubber Foot Pads *4

Assembly

1. Unbox

Open the packaging box, first take out the accessory box in the middle, then hold the middle crossbeam of the machine body and take it out, placing it flat on the desktop.

Remove the protective cushioning material from the head and X beam.

2. Install the supports

Place the back of the machine body gently flat on the desktop.

Take out the 4 aluminum profile supports (including pre-installed connecting parts) from the accessory box and insert them directly from the bottom of the machine body's upright columns, then fasten the set screws to securely connect the support legs to the machine body.

Install 4 rubber pads on the bottom of the aluminum profile supports.

Gently lift and place the machine body normally on the desktop.

The assembly of the machine body frame is complete.