PPBF-AS2-MountingBlockA-AlignTool 08 12 16 24

**Function:** Assists in positioning the MountingBlockA component for AS2, enabling alignment and installation to the appropriate position, supporting all widths.

**Usage:**
1. Preliminarily position one or more MountingBlockA components to the installation location (using M3x8 screws and T-nuts, with the T-nuts falling into the aluminum profile slots);
2. Place the corresponding AlignTool from top to downward, aligning the controller's 4P pin header with the BlockB positioning block in the middle of the body. At this point, the MountingBlockA will be aligned with the slot in the middle of the AlignTool;
3. Tighten the M3x8 mounting screws for MountingBlockA, then remove the AlignTool.


License: CC BY-NC-SA 4.0

pandaplacer.com